Roof Coatings in Billings, MT

Roof coating systems offer a cost-effective alternative to full roof replacement. Silicone and acrylic coatings seal leaks, reflect UV rays, and extend the life of your existing flat roof by 10-15 years—without the expense and disruption of tear-off.

Types of Roof Coatings

Benefits of Roof Coatings

• Extend Roof Life: Add 10-15 years to your existing roof
• Seal Leaks: Creates seamless, waterproof barrier over entire roof
• Energy Savings: Reflective coatings reduce cooling costs 15-30%
• No Tear-Off: Apply directly over existing roof, avoiding landfill waste
• Cost Savings: 50-70% less than full roof replacement
• Warranty Protection: Manufacturer warranties up to 20 years

Roof Coating Application Process

1. Roof Inspection: Assess existing roof condition and identify repairs needed
2. Surface Preparation: Power wash and remove debris, chalk, and contaminants
3. Repairs: Patch leaks, reseal seams, replace damaged flashing
4. Primer Application: Apply primer if required for adhesion
5. Base Coat: Roll or spray first coat of coating material
6. Reinforcement: Embed mesh at seams and penetrations
7. Top Coat: Apply final coat for complete coverage
8. Final Inspection: Verify mil thickness and warranty requirements

Roof Coating Cost in Billings

Roof coating systems cost $2.50–$5.00 per square foot in Billings, depending on:

• • Coating type (silicone vs acrylic)
• • Required mil thickness (20-40 mils)
• • Amount of surface preparation needed
• • Extent of repairs required
• • Roof accessibility

Is Your Roof a Candidate for Coatings?

Good candidates for roof coatings have:

• ✓ Minor to moderate existing damage
• ✓ No structural issues or deck rot
• ✓ Existing membrane is securely attached
• ✓ Less than 25% saturated insulation
• ✓ Compatible existing roofing material